Invoices

Pay invoices here

Sort Order:

A wall sconce to take a single dinner candle. The sconce projects 8" (20 cm) from the wall and is available in black or a copper-pewter antique (hammered) finish.
View Product Details...

Finish:

Glass Saucer to fit Oil Burner

A spare glass saucer to fit any of the oil burners in our range.
View Product Details...

548 Flowerpot Votive

This heavy glass votive is 70mm (2.75") in diameter at the top, 47mm (1.75") diameter at the bottom and 65mm (2.5") tall. Available in clear or white frosted glass. Unit: 72.
View Product Details...

Glass Colour:

549M Conical Glass Red Frosted

This unusual conical glass sits in a ring and will take either a tealight or a standard dinner candle. It is 76mm (3") in diameter and 70mm tall. Currently only available in a red frosted finish. Individually boxed in an outer of 144.
View Product Details...

623B Triple 'S' Candleholder

A low-level candleholder to hold three dinner candles. The drip saucers will catch any drips of wax. 8.25" (21 cm) long with adjustable sconces. Finished in black.
View Product Details...

628 Celebration Candleholder

A beautiful contemporary design of candlestick 10.5" (27cm) tall with a 3.75" (95mm) diameter spiked saucer. Available in a choice of black, gold or silver finishes.
View Product Details...

Finish:

786 Short Stem

Our short stem is 16.5" (42 cm) long. It is threaded at both ends, so that it can be screwed into the bottom of one of our table centres and also into one of our bases or feet. Alternatively, if a base or feet are not used, the stem can be inserted into the top of a telescopic pedestal base. Available finished in black, gold, ivory, silver and white.
View Product Details...

Finish:

468B Fleur-de-lys Advent Frame for 2" Candles

This Advent frame has fleur-de-lys sconces, nominally to hold 2" (51mm) diameter candles, but also with limited adjustment. The ring is 14" (35.5cm) in diameter. The frame is manufactured in the United Kingdom and finished in black epoxy.
View Product Details...

9004 Round Pinholder, 2.25" (57 mm) diameter

2.25" (57mm) diameter pinholder, kenzan or frog. It has a heavy lead base with a dense array of brass pins, weighs approximately 260g and will not rust. It is therefore far more economical and friendly to the environment than florists' foam in the long term, since it can be re-used indefinitely. Individually boxed.
View Product Details...

9024 Small Tapered Well Pinholder

Our smallest tapered well pinholder, kenzan or frog is 2.25" (6 cm) in diameter at the top and 1.25" (3.5 cm) deep. Being moulded in lead it is heavy and weighs approximately 400g. It has a dense array of brass pins and will not rust. The tapered sides allow stems to easily be laid out to the sides, if desired. Finished in black, with a black beize base to protect the surface on which it is placed, it is perfect for ikebana.
View Product Details...

9550 11" Tapered Dinner Candle, Plain Base, Box of 208

11" (280mm) tall standard dinner candle with the base left untapered so that is is slightly larger than 7/8" (22mm) diameter at the base. This good quality candle is manufactured in the United Kingdom and burns for approximately 10 hours. Unit: 208.
View Product Details...

9607 50mm x 165mm Church Candle

50mm (2") diameter church pillar candle 165mm (6.5") tall. This good quality non-drip candle is manufactured in Germany and burns for approximately 35 hours. Unit: 40.
View Product Details...

Colour:

9626 80mm x 230mm Church Candle

80mm (3") diameter church pillar candle 230mm (9") tall. This good quality non-drip candle is manufactured in Germany and burns for approximately 95 hours. Unit: 18.
View Product Details...

Colour:

9651 Large Heart Floating Candle

85mm (3.25") x 85mm (3.25") x 50mm (2") deep heart-shaped floating candle. This good quality candle is manufactured in Germany and burns for approximately 8 hours. Unit: 50.
View Product Details...

Colour:

136B 6" (152 mm) diameter Saucer

A classic and simple metal saucer suitable for pillar candles up to 5" (125mm) diameter, or for ball candles up to 6" (150mm) diameter, or for a flower arrangement. Manufactured in the United Kingdom and finished in black. Also available with a spike finished in a choice of black, gold or silver.

View Product Details...

Finish:

302 4.5" (114mm) dia. Scallop-edge Spiked Saucer

A variation on our classic and metal candleholder made more interesting by its scalloped edge. Suitable for pillar candles up to 3.25" (80mm) diameter, or for ball candles up to 4" (100mm) diameter. Finished in a choice of black, gold, ivory, silver, or white.
View Product Details...

Finish:

088B 3.25" (82mm) square fleur-de-lys candleholder

A metal candleholder with fleur-de-lys sides suitable for square candles up to 3.25" (82mm). Manufactured in the United Kingdom and finished in a black epoxy coating.
View Product Details...

134 6" (152mm) diameter Saucer on ring feet

A metal saucer suitable for pillar candles up to 5" (125mm) diameter, for ball candles up to 6" (150mm) diameter, or for a flower arrangement. Manufactured in the United Kingdom and finished in a choice of black, gold, silver or rust epoxy.
View Product Details...

Finish:

« Previous | ...10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20... | Next »